TECHNICAL
PROGRAM

IFETC 2021 technical program is below. Please note that the program schedule may change, so be sure to reference this page for the latest program.

All times listed below are in the US EASTERN TIME .

  Sun - Aug 08      Mon - Aug 09      Tue - Aug 10      Wed - Aug 11   


Tuesday, August 10th

9:00 - 11:00 AM

Live Event
LIVE EVENT - INVITED: INVITED SESSION 3 - CHEMISTRY & MATERIALS
Chair/Organizer: John Anthony, C. Daniel Frisbie

9:00
Towards Efficient and Stable Printed Single-Layer OLEDs
Paul W.M. Blom. Max Planck Institute for Polymer Research

9:30
Pushing the Limits of Printed and Flexible Organic Electronics: Thin, Fast and Edible
Mario Caironi. Center for Nano Science and Technology @PoliMi, Istituto Italiano di Tecnologia

10:00
Organic Bioelectronics: Next Generation Point-of-Care Sensors
Anna-Maria Pappa. University of Cambridge

10:30
Semiconducting: Insulating Polymer Blends Targeted for Flexible Optoelectronic Applications
Natalie Stingelin. Georgia Institute of Technology
11:30 - 12:30 PM

Live Event
LIVE EVENT - PLENARY: PLENARY SESSION 3
Chair/Organizer: Paul Berger

11:30
Printable Nanoelectronics via Innovative Manufacturing Paradigms
Thomas Anthopoulos. King Abdullah University of Science and Technology (KAUST)
12:30 - 1:30 PM

Live Event
LIVE EVENT - EXHIBITS: NETWORKING
1:30 - 3:00 PM

Live Event
LIVE EVENT - ORAL ABSTRACTS: ABSTRACT SESSION 4
Chair/Organizer: Luisa Petti, Peide Ye

1:30
Direct-band gap, solution-processed 2D layered perovskites for flexible photodetectors
Mohin Sharma1, Ridwan F. Hossain1, Anupama B. Kaul1, 2. 1Department of Electrical Engineering, PACCAR Technology Institute, University of North Texas, Denton, TX, USA.2Department of Materials Science and Engineering, University of North Texas, Denton, TX, USA

1:45
Strain Sensing Graphene Functionalized PET Films based on a Facile Dip Coating Approach
Ekin Asim Ozek1, Melih Can Tasdelen1, Sercan Tanyeli1, Murat Kaya Yapici1, 2, 3. 1Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, *, Turkey.2Sabanci University Nanotechnology Research Center, Istanbul, *, Turkey.3Department of Electrical Engineering, University of Washington, Seattle, WA, USA

2:00
Flexible Gallium Oxide (Ga2O3) Thin Film Transistors (TFTs) and Circuits for the Internet of Things (IoT)
Sagar R Bhalerao1, Donald Lupo1, Paul R Berger1, 2. 1Department of Electrical Engineering, Tampere University, Tampere, *, Finland.2Department of Electrical and Computer Engineering, The Ohio State University, Columbus, OH, USA

2:15
Top-Gate Indium Oxide Transistors by Low-Temperature Atomic Layer Deposition of Gate Insulator and Channel Semiconductor
Mengwei Si, Peide Ye. Purdue University, West Lafayette, IN, USA

2:30
Thermal Stability of Flexible IGZO/Ag Schottky Diodes on Cellulose Microfiber Paper Substrate
Sahira Vasquez, Mukhtar Ahmad, Mattia Petrelli, Martina Aurora Costa Angeli, Raheel Riaz, Ali Douaki, Giuseppe Cantarella, Niko Muenzenrieder, Paolo Lugli, Luisa Petti. Free University of Bozen-Bolzano, Bolzano, *, Italy

LIVE EVENT - ORAL ABSTRACTS: ABSTRACT SESSION 5
Chair/Organizer: Niels Benson, Savas Kaya

1:30
Development of a Zn/MnO2 Based Flexible Battery
JustOne Crosby1, Himanaga Emani2, Xingzhe Zhang2, Dinesh Maddipatla2, Soma Ahmadi2, Qingliu Wu1, Bradley Bazuin2, Matthew Stoops1, Massood Atashbar2. 1Department of Chemical and Paper Engineering, Western Michigan University, Kalamazoo, MI, USA.2Department of Electrical and Computer Engineering, Western Michigan University, Kalamazoo, MI, USA

1:45
Investigating the Impact of Thickness, Calendering and Channel Structures of Printed Electrodes on the Energy Density of LIBs - 3D Simulation and Validation
Soma Ahmadi1, Guanyi Wang2, Dinesh Maddipatla1, Qingliu Wu2, Wenquan Lu3, Massood Zandi Atashbar1. 1Western Michigan University, Kalamazoo, MI, USA.2Western Michigan University, Kalamazoo, MI, USA.33Argon National Laboratory, Lemont, IL, USA

2:00
Impact of Diverse Ambient Illuminations on a Flexible Photosensitive Energy Scavenger
Emad Iranmanesh1, Ahmed Rasheed2, Hang Zhou1, Kai Wang3. 1School of Electronic and Computer Engineering, Peking University, Shenzhen Graduate School, 518055 Shenzhen, *, China.2School of Electrical Engineering and Computer Science, National University of Science and Technology Islamabad, *, Pakistan.3School of Electronics and Information Technology, Sun Yat-Sen University, 510006 Guangzhou, *, China

2:15
Flexible, biocompatible, and ridged silicone elastomers based robust sandwich-type triboelectric nano-generator
Raheel Riaz1, 3, Bhaskar Dudem2, Martina Costa Angeli1, Ali Douaki1, Mukhtar Ahmad1, Mattia Petrelli1, Abraham Mejia-Aguilar3, Roberto Monsorno3, S. Ravi P Silva2, Paolo Lugli1, Luisa Petti1. 1Sensing Technologies Lab, Free University of Bolzano, Bolzano, *, Italy.2Advanced Technology Institute, University of Surrey, Surrey, *, United Kingdom.3Center for Sensing Solutions, Eurac Research, Bolzano, *, Italy

2:30
Plasma Jet Printing and Photonic Sintering of Thermoelectric Colloidal Nanoplatelets for Flexible Energy Harvesting
Ariel E. Weltner1, Jacob Manzi2, Tony Varghese2, David Estrda1, 3, 4, Harish Subbaraman2, 3. 1Micron School of Material Science and Engineering, Boise State University, Boise, ID, USA.2Electrical and Computer Engineering Boise State University, Boise, ID, USA.3Center for Advanced Energy Studies, Boise State University, Boise, ID, USA.4Idaho National Laboratory, Idaho Falls, ID, USA

2:45
A Novel MWCNTs/PDMS based Flexible Triboelectric Nanogenerator for Energy Harvesting Applications
Xingzhe Zhang, Duo He, Dinesh Maddipatla, Qiang Yang, Massood Atashbar. Western Michigan University, Kalamazoo, MI, USA

LIVE EVENT - ORAL ABSTRACTS: ABSTRACT SESSION 6
Chair/Organizer: Matti Mantysalo, Ta-ya Chu

1:30
Printed Low-Voltage Crossbar-PUF for Identification
Alexander Scholz1, 4, Lukas Zimmermann3, Axel Sikora2, 3, Mehdi B. Tahoori5, Jasmin Aghassi-Hagmann1, 4. 1Institute for Applied Research, Offenburg University of Applied Sciences, Offenburg, *, Germany.2Institute of Reliable Embedded Systems and Communication Electronics, Offenburg University of Applied Sciences, Offenburg, *, Germany.3Hahn-Schickard-Gesellschaft fuur angewandte Forschung, Villingen-Schwenningen, *, Germany.4Institute of Nanotechnology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen, *, Germany.5Chair of Dependable Nano Computing, Karlsruhe Institute of Technology, Karlsruhe, *, Germany

1:45
Low-Resistance Screen-Printed Nanoparticle Ink Tracks for High-Current Applications
Xiaotian Li, Henrik Andersson, Johan Siden. Mittuniversitetet, Sundsvall, *, Sweden

2:00
Flexible Touch Pad on Paper and Cloth by Blue Diode Ablated Laser Induced Graphene
Avinash Kothuru, C. Hanumanth Rao, Sanket Goel. MEMS, Microfluidics and Nanoelectronics (MMNE) Lab, Department of Electrical and Electronics Engineering, Birla Institute of Technology and Science, Pilani, Hyderabad Campus, Hyderabad, *, India

2:15
Stacked 1D Tellurium Nanowires/Paper based Pressure Sensor with Laser Assisted Patterned PDMS Encapsulation
Venkatarao Selamneni, Parikshit Sahatiya. Department of Electrical and Electronics Engineering, Birla Institute of Technology and Science Pilani, Hyderabad Campus, Hyderabad, *, India

2:30
Inactivation of B. subtilis Spores Using Flexible Microplasma Discharge Device
Arnesh K Bose, Carol L Beaver, Dinesh Maddipatla, Silvia Rossbach, Massood Atashbar. Western Michigan University, Kalamazoo, MI, USA
3:30 - 4:30 PM

Live Event
LIVE EVENT - PLENARY: PLENARY SESSION 4
Chair/Organizer: Paul Berger

3:30
Manufacturing of Low Cost Wearable Human Health Monitoring Devices
Azar Alizadeh. GE Research
5:00 - 7:30 PM

Live Event
LIVE EVENT - INVITED: INVITED SESSION 4 - ADDITIVE MANUFACTURING
Chair/Organizer: John Williams, Eric MacDonald

5:00
Process-Properties-Performance Interaction of Additively Printed Flexible Circuits with Surface Mount Components Pradeep Lall
Pradeep Lall. Auburn University

5:25
Uniaxial and Multiaxial Test Techniques for Reliability Assessment of Flexible and Wearable Electronics
Suresh Sitaraman. Georgia Institute of Technology

5:50
Multimaterial Additive Manufacturing of Radiofrequency Devices and Systems
Mark Mirotznik. University of Delaware

6:15
Flexible Multilayer Printed Circuit Board Prototype Offering for Confined Form Factors
John Williams. Boeing Research and Technology

6:40
Ultrahigh resolution printing and novel materials for piezoelectric sensing, photonic metasurfaces and quantum materials
Devin MacKenzie. University of Washington

7:05
Advanced Design Capabilities and Manufacturing Considerations Utilizing Liquid Metal Conductors in Flexible Hybrid Electronics
Mike Hopkins. Liquid Wire, Inc.